Questions tagged [change-set]
Change sets are to send customizations from one organization to another organization.
67
questions with no upvoted or accepted answers
10
votes
1
answer
945
views
Deploy with Active Jobs - active job ignores deployed code on next scheduled run
I have an anonymous Apex scheduled job that runs every three hours on the hour:
String cron = '0 00 07,10,13,16,19,22 * * ? 2015';
MyScheduledDispatcher sd = new MyScheduledDispatcher();
System....
- 70k
7
votes
0
answers
952
views
Is it possible to remove components from a Change Set using the Metadata API?
I'm using a trick that was mentioned in this related question to programmatically add elements to a Change Set using the Salesforce Metadata API. Basically, you treat the name of the Change Set as ...
- 1,062
4
votes
1
answer
599
views
How to name a deployment done via Metadata API?
When we deploy the code changes using changesets, we can see the name of the deployment.
The picture is not very clear, but you can see the Docusign changes. How can we name our deployments when ...
- 1,114
3
votes
0
answers
943
views
Deployment Error – UIType isn't updateable for custom apps
Running into an change set deployment error I've never seen before:
UIType isn't updateable for custom apps
I've got just about all of the dependencies already deployed. And the only information I ...
- 43
3
votes
0
answers
86
views
Changeset items diff between changeset and org
Before the new deployment status page was added, there used to be a feature which showed you the items in your changeset that are new, that will modify the existing items, or that have not changed ...
- 31
2
votes
0
answers
237
views
Is there a faster way to traverse your Outbound Changeset?
So I have an outbound changeset that contains more than 350 components. Now the changeset list only shows 25 components at one time and it would take me a million years to traverse all the way to the ...
2
votes
0
answers
428
views
Reproducible? Cannot Add Custom Metadata Record to Change Set if it References Id Field?
I have a Custom Metadata Type which contains a field mapping. There are four basic fields which seem relevant to this situation (though you could likely boil it down to just two):
Source Object (...
- 149k
2
votes
0
answers
2k
views
Limitation in Global Picklist while deploying via ChangeSet?
Is there any issue or Limitation with Global Picklist while its being deployed from One ORG to another.
I had some Custom Fields and a Global Picklist field. I have written a Trigger on Case to ...
- 1,807
2
votes
0
answers
1k
views
Deployment failed: Component Errors: Duplicate picklist value:Yes_or_No - No
Issue: When validating a change set of 300 items into production, I
received one component error:
API Name: Opportunity.New_Integrated_Payments_Customer |
Type: Record Type | Line: 5028 | ...
- 3,514
2
votes
0
answers
229
views
Errors in production use while deployment/validation is running
During the validation or deployment of a change set, you cannot edit Salesforce metadata. I understand why this is necessary.
But sometimes, users cannot edit some records during the validation or ...
- 1,224
2
votes
0
answers
233
views
Button script wasn't updated from the change set
Some time ago I deployed change set to the production - 1 button and 4 validation rules. Now I have noticed that despite deployment status was "Deploy: Succeeded", button code wasn't updated (but ...
- 163
2
votes
1
answer
344
views
Deployment Status
I have 1 custom object that I deploy via Change Sets.
Result: Deployment Status page, component count = 1
I deploy same custom object via ANT
Result: Deployment Status page, component count = 17
...
user18961
1
vote
0
answers
351
views
Deactivating a Trigger code coverage
I am trying to deactivate a trigger in sandbox and push to production but an not able to validate/deploy in production due to a code coverage error. I have tried both deactivating the trigger and ...
1
vote
1
answer
1k
views
Error during validation of change sets: "Required field is missing: pageOrSobjectType"
I'm having trouble with the deployment of a lightning app through change sets.
This is the error I am getting:
Required field is missing: pageOrSobjectType
So I went through the source code of the ...
- 362
1
vote
0
answers
723
views
Site.com deployment to other organisaton using change set
I am facing this error while trying to deploy a community portal to another organization
We couldn't validate componentAttributes in partnerportalv31/views/recordList.json for component 0ff249c1-7e01-...
1
vote
0
answers
266
views
Custom Label Deployment using outbound Change Set
I created a Change Set and added about 15 components, including 4 custom labels
The Custom Labels did not get deployed, I don't see these in the destination org.
Am I missing something?
- 845
1
vote
0
answers
68
views
Can I deploy backed up outbound change set after sandbox refresh?
I want to get my outbound change set back in my sandbox after it is refreshed. Till now, I can backup my outbound change sets with sfdx force:source:retrieve command. But I can not deploy these again ...
1
vote
1
answer
1k
views
Changing field from Text Area to Text Area (Long) results in cannot change type due to data loss. Why?
On a sandbox I commented out references of a text area field from :
ApexClass, ApexPage, EmailTemplate, 2 Flows, and a layout. I then was able to make the change of the data type just fine.
Now when ...
- 521
1
vote
0
answers
85
views
Translations of standard fields via change set
Is it possible to migrate the translated values for standard fields and managed packages? Due to the fact that standard fields cannot be included in the change set, i can't find a way to migrate the ...
- 847
1
vote
0
answers
103
views
Change Set not deploying
I'm wondering if anyone else is having an issue with change sets today? I have created two change sets and deployed them to production. This was about 6 hours ago and they are still not there.
I ...
- 407
1
vote
0
answers
108
views
Cannot create NEW Outbound Changeset when in Classic Experience
I get the following error whenever I try to create a new Outbound Change set in Sandbox:
Unable to Access Page
The value of the "id" parameter contains a character that is not allowed or the ...
- 1,251
1
vote
0
answers
612
views
Insufficient privileges to add Page Layout and Documents to change sets
I'm trying to bring page layouts and documents into production with change sets, but I can't because SF says insufficient privilege. I'm using an admin profile and I have already created other change ...
- 13
1
vote
0
answers
537
views
Method does not exist or incorrect signature
I am probably missing something very basic but I can't spot it.
I get this error when I try to upload a change set to production:
CaseCommentHandler: Method does not exist or incorrect signature: ...
- 1,587
1
vote
0
answers
41
views
Visualforce page functionality not preserved through change set
After a couple of weeks of developing and testing a visualforce page, we decided it was time to go live (rather, it was time for everything to start going wrong..). After pushing the custom objects, ...
- 95
1
vote
1
answer
48
views
Tools To Manage (Split, Edit More Easily, etc) Change Sets?
I am not finding anything on AppExchange.
Does anyone know of a "Change Set" editor better than that built into Salesforce? Trying to remove items from a change set is a nightmare. We have a need ...
- 4,674
1
vote
0
answers
483
views
Error in change set with MasterDetail relationship even after relationship deleted
I'm getting the following error:
Cannot set sharingModel to ControlledByParent on a CustomObject without a MasterDetail relationship field
I've looked it up online and found out that it (likely) ...
1
vote
0
answers
656
views
How to deploy sharing rules such that already existing sharing rules in production are not affected?
Some one asked me this question and i dont know the answer.How can I deploy sharing rules from sandbox to production such that already existing sharing rules in production are not affected
- 53
1
vote
0
answers
86
views
Migration of Permission Sets through Change set gives error
I got an error while Migrating Permission Set from one Sandbox to another.
Permission Read All A depends on permission(s): Read All B.
I have checked Object Setting for both the object and the ...
- 301
1
vote
0
answers
253
views
deploying renamed page layout and record types in Prod from FULL
I have recently refreshed my FULL sandbox with Prod. I wish to rename some page Layout and record type name( Label and API name) in FULL. I have added some section to this renamed page layouts and ...
- 4,761
1
vote
0
answers
67
views
API name change from DEV to FULL
I have a field with same label name and API name in DEV and FULL. I would like to rename the API name in DEV and move it to FULL using change set. Would it rename the API name in full or would it ...
- 4,761
1
vote
4
answers
2k
views
Using Change sets got an Error at Validating Assignment Rule:
Can any one help me out. I have an assignment rule on case object in sandbox as well as in production.Now we have added two rule entries to the same rule based on the profile user in sandbox .Now can ...
- 1,345
1
vote
0
answers
123
views
More "approved" components than were added
So I was using salesforce Change Sets to send a project from sandbox to production. I have control over both so I know what is outgoing and what is incoming. I was sending some fields and a layout (30 ...
- 361
0
votes
1
answer
31
views
Help deploying apex trigger into production
So attempting to deploy my trigger into production
I've created a test class and I got 100% coverage.
When I create a change and and deploy it from production I am getting these errors.
Not sure what ...
- 79
0
votes
0
answers
102
views
How to deploy a changeset to a sandbox including the changeset itself?
I have a partial data sandbox A, in which I have a changeset containing more than 100 items. I would like to refresh the sandbox, but of course I want to preserve the changes in the changeset.
The ...
- 3,984
0
votes
0
answers
105
views
State and Country/Territory Picklists - test and push to prod
Is there a way I can push my mapping changelist for state & country data? Current state data is so messy that it took me days in our sandbox environment, so I was hoping there's an easier way in ...
- 1
0
votes
0
answers
165
views
Can not complete deployment from of a community site from one sandbox to anther due to error parsing file
When we do a deployment of a Digital Experience site from one sandbox to another, using changesets, we get an error during the validation process that states:
Error parsing file: Element {http://soap....
0
votes
1
answer
223
views
Issue with deploying change set with trigger
This is a follow-up ask to this question regarding code coverage.
I've achieved 100% code coverage doing unit testing in our sandbox.
I attempted to deploy the trigger and test class to production ...
0
votes
0
answers
79
views
Does validating a deployment impact application performance?
Earlier today, I was using Copado to validate a change set to UAT sandbox that included ~40 apex classes and running code coverage for all of them. Within the same 30 minute time period that the ...
- 1,182
0
votes
1
answer
467
views
Permission set not availble in Change set!
While deploying a community, got the below error
In field: permissionSet - no PermissionSet named <permission_Set_name> found
I created an outbound change set, after "ADD"
under ...
- 11
0
votes
0
answers
61
views
Ways to upload code and other metadata to Production
What are the best options to deploy metadata from Sandbox to Production?
Our installation consists of many installed managed packages, custom objects, fields and a lot of Apex code.
We had used ...
- 847
0
votes
0
answers
45
views
What Gets Pushed When Profiles Are Added to and Sent Through Change Sets?
I was under the impression that only the relevant permissions to the components included in the change set were sent over, but in uploading change sets and validating them, I'm getting validation ...
- 677
0
votes
1
answer
1k
views
Change set - What's deployed with my object
I have a question regarding change set:
I need to deploy a standard object using change set and I was wondering what gets deployed if I just include my object in my change set, I know that when we use ...
- 39
0
votes
0
answers
311
views
Deploying Custom Metadatatype and apex class using that custom metadata type
I have an apex class which is exposed as a rest API, It sends field value of a custom metadata type in response.
My response string is like this -
string respString = '{"success":'+true+'...
- 25
0
votes
1
answer
278
views
Order of deployment of a new Custom Object from UAT to PROD
i'm new to deploying new object to PROD. I would like to know the order of adding components to outbound changeset in UAT. currently i have below around new custom object.
Process Builder
workflow ...
0
votes
1
answer
54
views
How to access changeset without data access?
I want to ask a serious concern due to data privacy. As I have to work from outside country and due to data protection production user data is not allowed to share with me as I have stay outside ...
- 201
0
votes
1
answer
228
views
Error deploying change set
I am validating a change set containing multiple LWCs and Apex from Sandbox to Sandbox. Everything works in the sandbox originating the change.
Error when validating:
ORA-20070: Assertion Failed ORA-...
- 410
0
votes
1
answer
3k
views
Salesforce Community: Adding Asset files to a change set and validating without errors
I am in the process of migrating a salesforce community from the dev sandbox to full sandbox. I have successfully created and validated all required Components Available in Change Set, (https://help....
- 61
0
votes
0
answers
337
views
Page Layout in Change Set
I Added Page Layout to outbound change set, added profiles to change set and deployed it in Production but page layouts were unchanged in production. What is the reason?
- 529
0
votes
1
answer
146
views
Can change set with warning still be deployed?
When during deploying change set to prod you get a warning like
long-running apex test
Can you still successfully deploy that change set or does the warning blocks it?
- 1
0
votes
1
answer
392
views
Prepare a change set to deploy an updated trigger from dev to Production
I am preparing a change set to deploy an updated trigger from sandbox to production. Now, there are associated classes and other dependencies. Do I have to add all the dependencies in the 'Add ...
- 389